Go Back   Club Conspiracy Forums > General Conspiracy Discussion > General Conspiracy Discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read



Reply
 
Thread Tools Display Modes
  #1  
Old 05-11-2006, 07:32 PM
Guest
 
Posts: n/a
Default O'Connor Forecasts Dictatorship


http://www.slate.com/id/2137961/?nav=navoa
www.guardian.co.uk/frontpage/story/0,,1729656,00.html

Reply With Quote
  #2  
Old 05-11-2006, 08:57 PM
Jimbo's Avatar
Jimbo Jimbo is offline
Senior Member
 
Join Date: Nov 2004
Posts: 961
Default Re: O'Connor Forecasts Dictatorship

Torchlithill, whenever you get a URL, like the second one you posted, that for some reason does not work as intended (it looks like the “comas” are breaking up the “parsing” done by the site’s HTML interpreter somewhere), you have to either use the 1st button to the right of “MESSAGE: & right above “SIZE” in the “ClubConspiracy’s” “post-editor” or, you can directly use the following construct,

[url = http: // link ] Link's Title or Name [ / url ]

Make sure you remove the spaces first. Leave the word “url” there & replace the “http: // link” (w/o spaces) w the “hyperlink” that you want the user to “go to”, & then replace the “Link’s Title or Name” part w/ either the same exact “hyperlink” or “link”, or give it some name, like the Title of the article for that web page.

You can experiment & test what you just entered by hitting the "Preview" button. If it works, then you know you entered everything right. You can always cut & paste the entire “link” into a “Wordpad” session to avoid “Word” to mess it up while you are entering it. Then you cut & paste it from Worldpad back into “Word” (if that’s what you are using).

Notice that there are square brackets “[ ]” around some parts of that expression. These are used by the “ClubConspiracy’s” “post-editor”. HTML has it’s own tags, such as “< a href = link" Title " / a >” which might accomplish the same thing (again w/o the spaces), but you have to “Check” the “Enable html tags” option at the bottom of the “ClubConspiracy’s” “post-editor” at the bottom of the “editor’s” page on the “lower left hand” & right below the “editing text” box. When this option is “enabled”, what it does is, it allows for you to use “standard HTML” constructs, & it is going to “interpret” them for you. Otherwise, it is just going to ignore them.

Here is the link you entered & fixed so that it works.

www.guardian.co.uk/frontpage/story/0,,1729656,00.html

Remember that “all spaces” must be removed, including the not so obvious ones, such as when you press the "Enter" key to cause what’s called a “carriage return – line feed”.

If you want to see what it actually looks like, & even “cut & paste” it into your “text area” you can hit the "Quote" button (after you signon as a user for editing) & get it from the “text window area”.
__________________
Freedom is to understand, & to be unbounded by that Freedom -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
.
Reply With Quote
  #3  
Old 05-11-2006, 09:05 PM
Guest
 
Posts: n/a
Default Re: O'Connor Forecasts Dictatorship

Thanks, I'll try it, I've had about four sites that have done that to me tonight.
Reply With Quote
  #4  
Old 05-11-2006, 10:09 PM
Jimbo's Avatar
Jimbo Jimbo is offline
Senior Member
 
Join Date: Nov 2004
Posts: 961
Default Re: O'Connor Forecasts Dictatorship

I had to re-post it, since “embedding” HTML syntax in here for display purposes only, gets really tricky, & some characters actually disappear form the “output”. You see them in your “text area” but when you "output" it, they don’t come out.

Torchlithill, whenever you get a URL, like the second one you posted, that for some reason does not work as intended (it looks like the “comas” are breaking up the “parsing” done by the site’s HTML interpreter somewhere), you have to either use the 1st button to the right of “MESSAGE: & right above “SIZE” in the “ClubConspiracy’s” “post-editor” or, you can directly use the following construct,

[url = http: // link ] Link's Title or Name [ / url ]

All of the constructs surrounded by square brackets only work here at ClubConspiracy, as far as I know. Pure HTML only uses the “chevrons” – “< >” to enclose what they call “tags”.

Make sure you remove the spaces first. Leave the word “url” there & replace the “http: // link” (w/o spaces) w the “hyperlink” that you want the user to “go to”, & then replace the “Link’s Title or Name” part w/ either the same exact “hyperlink” or “link”, or give it some name, like the Title of the article for that web page.

You can experiment & test what you just entered by hitting the "Preview" button. If it works, then you know you entered everything right. You can always "cut & paste" the entire “link” into a “Wordpad” session to avoid “Word” to mess it up while you are entering it. Then you "cut & paste" it from Wordpad back into “Word” (if that’s what you are using).

Notice that there are square brackets “[ ]” around some parts of that expression. These are used by the “ClubConspiracy’s” “post-editor” only. HTML has it’s own tags, such as “< a href = "link" > Title < / a >” (you need the quotes around the "link" & remove all spaces except the one space between the "a href". The Title can have spaces) which might accomplish the same thing, but you have to “Check” the “Enable html tags” option at the bottom of the “ClubConspiracy’s” “post-editor” at the bottom of the “editor’s” page on the “lower left hand” & right below the “editing text” box. When this option is “enabled”, what it does is, it allows for you to use “standard HTML” constructs, & it is going to “interpret” them for you. Otherwise, it is just going to ignore them.

Here is the link you entered & fixed so that it works.

www.guardian.co.uk/frontpage/story/0,,1729656,00.html

Remember that “all spaces” must be removed, including the not so obvious ones, such as when you press the "Enter" key to cause what’s called a “carriage return – line feed”.

If you want to see what it actually looks like, & even “cut & paste” it into your “text area” you can hit the "Quote" button (after you signon as a user for editing) & get it from the “text window area”.

If you have any problems, I might need to send you an e-mail.
__________________
Freedom is to understand, & to be unbounded by that Freedom -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A Military Dictatorship! redrat11 The effects of the NWO 4 07-06-2008 01:14 PM
Illuminati Dictatorship Predicted + The Solution Moti General Conspiracy Discussion 0 05-31-2007 09:26 PM
9/11 Was an Inside Job: Donna Marsh O'Connor Speaks Out SeC Opinions 1 08-30-2006 04:33 AM
Beware of coming U.S. dictatorship Akbar General Conspiracy Discussion 0 01-15-2006 03:35 PM
The Scientific Dictatorship/Depopulation Agenda neenafoof The effects of the NWO 0 11-20-2005 03:11 AM


All times are GMT -6. The time now is 02:30 AM.

Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.